Accessories

Optional Wi-Fi remote control for NPE series water heaters

NaviLink makes it easy to communicate with your Navien systems anywhere internet service is accessible. The NaviLink module attaches easily to any new or existing* Navien NPE series tankless water heater, NCB series combi‐boiler and NHB series boiler. Once installed, simply download the free app on your smartphone or tablet. Then you will be able to turn your unit on or off, change the water temperature, monitor system status and even activate the recirculation system on your NPE‐A tankless water heater.
Relax…with NaviLink you will have the convenience and control of all your Navien systems right in the palm of your hand.

* Existing installations may require the purchase of a new main PCB and front control panel

Combination space heating and domestic hot water system

The H2Air Kit utilizes the NPE-A pump to circulate the hot water for the hydronic air handler. This removes the need to purchase an additional circulator for the heating system.

Designed for retrofit and new construction, the Navien H2Air Kit * includes an add-on controller to integrate space heating and DHW between any NPE-A series tankless water heater and a hyrdronic air handler.

NPE-A & NPE-S Accessories

NaviLink™ Wi‑Fi Control (PBCM-AS-001)

This add-on accessory will enable customers with smartphones and tablets to control temperatures remotely, access usage data and receive diagnostic notifications on all Navien products (NPE-A, NPE-S, NCB-E, NHB). Additionally, recirculation activation can be scheduled for any hour of any day on the NPE-A…an industry first.

NaviLink Cable (GXXX001659)

Allows you to expand your NaviLink control to a maximum of 3 channels for monitoring 3 banks of 8 units. Requires NaviLink Control.

NaviLink Conversion Kit (30017405A)

Main PCB & Front Panel for units produced prior to 3/22/2016.

Common Vent Collar Kit (30014367A)

Required when multiple water heaters or boilers are cascaded together and common vented.

CSA certified for common venting up to 8 units.

Required on all water heaters and boilers produced on or after September 15, 2016 when common venting.

Includes Ready-Link Communication Cable (GXXX000546) and common vent collar damper.

H2Air™ Kit AHU Optimizer
(PNBD-000001)

Designed to allow combined space heating and domestic hot water utilizing the internal recirculation pump on the NPE-A series models as the AHU system pump. Only works with AHU’s.

HotButton™ Control Kit (PZZZ-00046)

HotButton kit is designed to allow manual operation of the recirculation pump found in the NPE-A series. Works with all NPE-A series units. Includes an add-on PCB, 1 push button and wall plate.

Extra Push Button (GXXX001426)

Extra Wall Plate (GXXX001427)

Ready-Link® Rack Base Component (GFFM-KDIZUS-001)

The free standing rack system is designed for infield assembly and indoor installation only. Designed to work with all Navien products. Base rack allows installation for up to 2 units back to back.

Add-on Component (GFFM-KDIZUS-002)

Designed to expand the base rack system allowing up to 16 units back to back on a free standing rack system. Designed for infield assembly and indoor installation only.

Ready-Link® Communication Cable (GXXX000546)

Required to cascade and common vent NPE, NCB and NHB-110 & NHB-150 models.

PeakFlow™ Anti‑Scale System (GXXX001326)

Anti-Scale system designed to treat hard water. Installs on the DHW cold supply.

Replacement Media for PeakFlow Anti-Scale System (GXXX001327)

Plumb Easy Valve Set 3/4″ Standard (30009323A)

3/4″ lead free isolation valves with relief valve designed to work on NPE and NCB series units. Allows for easy and quick servicing of DHW systems.

Plumb Easy Valve Set 3/4″ for Pipe Cover (30012581A)

3/4″ lead free isolation valves with relief valve designed to work on NPE series units. Allows for easy and quick servicing of DHW systems. Use with Pipe Cover.

Pipe Cover – NPE Series (30012634A)

Pipe cover designed to hide gas, water and power lines for an elegant, clean look. Works with NPE series units. Use with 30012581A Plumb Easy Valve Kit.

Outdoor Vent Kit (30010604A)

Designed for use with all NPE series units when installing your unit outside. Required for outdoor installations.

Neutralizer, Commercial – for up to 16 Units (GXXX001325)

Commercial condensate neutralizer for NPE, NCB and NHB series units designed to neutralize the condensate of
up to 16 units.

Replacement Media for Commercial Neutralizer (GXXX001329)

Neutralizer, Light Commercial – for up to 6 Units (GXXX001324)

Light commercial condensate neutralizer for NPE, NCB and NHB series units designed to neutralize the condensate of  up to 6 units.

Replacement Media for Light Commercial Neutralizer
(GXXX001328)

Neutralizer, Residential Kit, Single Unit (GXXX001322)

Residential condensate neutralizer for NPE, NCB and NHB series units designed to neutralize the condensate of one unit.

Replacement Media for Residential Neutralizer
(GXXX001323)

Remote Control for NPE Series (30009757A)

Designed for use with NPE series water heaters. Allows users to adjust temperature and set the timer for the recirculation activation on NPE-A models.

External Pump Connector for NPE Series (GXXX001319)

Allows all NPE series models to control an external pump through the internal PCB.

Wall Flange and Vent Terminate Kit 30010747A (2″)  |  30003873B (3″)

Wall flange designed to work on 2″ or 3″ intake and exhaust pipe for a clean installation look in location where the pipe goes through the wall.